Abrasive resistant ceramic tiles sheet product introduction:
According to the language habits of different countries, the names are different, and the main function of its products is wear resistance.
Alumina wear-resistant ceramic sheet, also known as wear-resistant ceramic lining, high-alumina lining, alumina ceramic sheet, pipeline lining, mosaic ceramic patch, magnetic separator lining, alumina ceramic lining, corundum wear-resistant film etc.
The special wear-resistant ceramic products, mainly made of alumina as the main raw material, are fired at a high temperature of more than 1,000 degrees, and are widely used in anti-wear equipment, such as magnetic separators, fan impellers, pipes, drums, and powder selection equipment. Wear-resistant parts such as conveying equipment can effectively prolong the service life of the equipment.
It features high wear resistance, high hardness, high toughness, light weight, firm bonding without falling off, fast construction and short maintenance time.
The main shapes are square and hexagonal, and the sizes are 10*10*3-10mm, 17.5*17.5*3-15mm, 20*20*3-20mm, and 25*25mm.
The bonding method mainly includes wear-resistant ceramic glue, which cures quickly, bonds firmly, and does not fall off.
According to the alumina content, there are two types, 92% and 95%.
Its parameters are (for reference), density ≥ 3.6 g/cm3, compressive strength ≥ 850 Mpa, fracture toughness KΙC ≥ 4.8MPa•m1/2, thermal conductivity 20W/m.K, thermal expansion coefficient: 7.2×10-6m/m.K , Rockwell hardness ≥ 80 HRA, compressive strength ≥ 850 Mpa.
